PBH 1500 C3
25
GB
IE
Using the chuck:
Insert the chuck key into one of the three
holes above the geared rim. By turning the
chuck key clockwise, you can now close
or tighten the drill holder. Turning the key
counter-clockwise will loosen the clamps.
NOTE
Fixing a drill unevenly or slightly off-center in
the wheel-rim chuck can cause excessive
vibrations and excessive wear and tear.
To avoid this when fixing the tool, apply
the chuck key to all the 3 positions on the
wheel-rim chuck one after the other.
WARNING!
►
Do not use the wheel-rim chuck for
hammer drilling or chiselling!
Operation
Select operational mode
Hammer switch:
Turn the hammer switch to the required
symbol:
Hammer drilling = Hammer ON
Drilling = Hammer OFF
Function selector:
Turn and hold the release button for the
function selector switch and rotate
the function selector switch so that the
required symbol engages at the arrow
mark.
Hammer drilling
Chiselling
NOTE
The following combinations are available:
►
Hammer OFF + hammer drilling =
drilling
►
Hammer ON + hammer drilling =
hammer drilling
►
Hammer ON + chiselling =
chiselling
►
Hammer OFF + chiselling = no
function
Preselecting rotational speed
You can use the rotational speed preselector
adjusting wheel to preselect the rotational
speed.
Work out the right setting with this practical
test:
- low rotation speed (setting 1 or 2) for
tasks requiring careful and precise drilling
- medium rotational speed (setting 3 or 4)
for drilling in steel or wood
- high rotational speed (setting 5 or 6) for
hammer drilling/chiselling in concrete or
stone
Switching on and off
Switching the appliance on:
Press the ON/OFF switch .
Switching the appliance off :
Release the ON/OFF switch .
Working Advice
Before any work on the machine
itself, pull the mains plug.
Vibration Damper
ANTI
VIBRATION
Summary of Contents for PBH 1500 C3
Page 3: ...A B ...
Page 32: ......
