![background image](http://html.mh-extra.com/html/parkside/pat-4-a1/pat-4-a1_original-instructions-manual_758415007.webp)
PAT 4 A1
■
4
│
GB
│
IE
│
NI
Noise emission value:
the measured values for sound comply with EN 60745. The A-weight-
ed single-event noise level, standardised to 1 s, is typically:
Sound pressure level:
L
pA
= 65.4 dB (A)
Uncertainty:
K
pA
= 3 dB
Sound power level:
L
WA
= 76.4 dB (A)
Uncertainty:
K
WA
= 3 dB
Wear hearing protection!
Vibration values determined in accordance with EN 60745:
Vibration emission value a
h
= 2.235 m/s
2
Uncertainty K = 1.5 m/s
2
NOTE
►
The vibration emission value specified in these instructions
has been measured in accordance with a standardised
measuring procedure and can be used to make equipment
comparisons. The specified vibration emission value can also
be used to make an initial exposure estimate.
WARNING!
►
The vibration emission value varies in accordance with the use
of the power tool and may be higher than the value specified
in these instructions in some cases. Regular use of the power
tool in such a way may cause the user to underestimate the
vibration. Try to keep the vibration loads as low as possible.
Examples of measures for reducing the vibration load are
wearing gloves when using the tool and limiting the working
time. All states of operation must be taken into consideration
(e.g. times when the power tool is switched off and times
where the power tool is switched on but running without load).
Summary of Contents for PAT 4 A1
Page 3: ...A B ...