![background image](http://html1.mh-extra.com/html/parkside/pat-12-b2/pat-12-b2_operation-and-safety-notes-translation-of-the-original-instructions_3840372018.webp)
16 GB
Before first use
Accessories
Only use the accessories and additional
equipment that are specified in the operating
instructions and are compatible with the
product.
Accessories and accessory tools are available
through your authorised dealer. When buying
always consider the technical requirements of
this product (see “Technical data”).
If you are not certain, ask a qualified
specialist and get advice from your trusted
dealer.
m
WARNING!
u
Do not use accessories not recommended
by Parkside. This may result in electric shock
or fire.
Charging the battery pack
(Fig. H)
m
CAUTION!
u
Always disconnect the power plug
[
]
before removing the battery pack
[
5]
from
the charger
[
]
and before connecting it to
the charger.
NOTE
u
Our battery packs
[
5]
are partially
charged. Charge the battery pack
completely before first use.
u
The battery pack
[
5]
can be charged at
any time as needed without shortening its
service life.
u
Interrupting the charging process does not
damage the battery pack
[
5]
.
u
Never charge the battery pack
[
5]
if the
ambient temperature is below +10 °C or
above +40 °C.
Insert the battery pack
[
5]
into the
charger
[
]
.
Connect the power plug
[
]
to a suitable
socket-outlet.
The charging control LEDs (green
[
]
and
red
[
]
) indicate the charging status of the
battery pack
[
5]
:
LED
Status
Red LED lights up
Battery pack is charging
Green LED lights up Battery pack fully charged
When the battery pack is fully charged:
Disconnect the power plug
[
]
from the
socket-outlet.
Remove the battery pack
[
5]
from the
charger
[
]
.
Inserting the battery pack
into the product
(Fig. E)
Align the ribs
[
]
of the battery pack
[
5]
with
the battery compartment’s slots.
Slide the battery pack
[
5]
completely into
the battery compartment until the battery
latches
[
4]
lock with an audible click into the
battery compartment.
Removing the battery pack
from the product
(Fig. F)
Press and hold the battery latches
[
4]
.
Pull the battery pack
[
5]
out of the battery
compartment.
Preparation
m
WARNING!
Always remove the battery pack
[
5]
before filling in or changing nails or
staples.
Choosing the correct length
for nails and staples
Consider 2 factors to choose the correct
length for staples and nails:
–
the thickness of the material to be fastened
–
the composition and hardness of the base
material
Summary of Contents for PAT 12 B2
