PAS 4 B4
GB
│
IE
│
NI
│
CY
│
5
■
NOTE
►
The vibration emission values and the noise emission values
given in these instructions have been measured in accordance
with a standardised test procedure and can be used for com-
parison of the power tool with another tool .
►
The specified total vibration values and the noise emission
values can also be used to make a provisional load estimate .
WARNING!
►
Depending on the manner in which the power tool is being
used, and in particular the kind of workpiece being worked,
the vibration and noise emission values can deviate from
the values given in these instructions during actual use of the
power tool .
►
Try to keep the vibration loads as low as possible . Measures
to reduce the vibration load are, e .g . wearing gloves and
limiting the working time . Wherein all states of operation
must be included (e .g . times when the power tool is switched
off and times where the power tool is switched on but run-
ning without load) .
Summary of Contents for PAS 4 B4
Page 3: ...A B 9b 9a...
