![background image](http://html2.mh-extra.com/html/parkside/par-12-a1/par-12-a1_translation-of-the-original-instructions_3977253011.webp)
GB
│
IE
│
NI
│
7
■
PAR 12 A1
Original accessories/attachments
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using attachments or accessory tools other than
those recommended in the operating instruc-
tions can lead to a risk of injury .
Before use
Charging the battery pack
CAUTION!
►
Always disconnect the mains plug before
removing or inserting the battery pack
4
from the high-speed charger
0
.
NOTE
►
Never charge the battery pack at an ambient
temperature of below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage climate
should be cool and dry and the ambient
temperature should be between 0°C and
50°C .
♦
Insert the battery pack
4
into the high-speed
charger
0
.
♦
Insert the mains plug into the mains socket .
The control LED
w
lights up red .
♦
The green LED
q
indicates that the charging
process is complete and the battery pack is
ready for use .
♦
Push the battery pack
4
into the appliance .
♦
You should always switch the high-speed
charger
0
off for at least 15 minutes between
successive charging processes . Also disconnect
the power plug from the mains power socket .
Inserting/removing the battery pack
Inserting the battery pack
♦
Snap the battery pack
4
into the handle
2
.
Removing the battery pack
♦
Press the two release buttons
3
and remove
the battery pack
4
.
Checking the battery charge level
♦
Press the ON/OFF switch
5
to check the
charge level of the battery .
The status/remaining charge will be shown on
the battery charge level display
1
as follows:
RED/ORANGE/GREEN = maximum charge/
performance
RED/ORANGE = medium charge/performance
RED = low charge – charge the battery
Use
Select direction of rotation
WARNING!
►
The rotation direction switch
9
may only
be used/adjusted when the appliance is at a
standstill .
♦
Select the direction of rotation by moving the
rotation direction switch
9
to the right or left .
Switching on/off
Turn on
♦
Press and hold down the safety lock-out
6
.
Then press and hold the ON/OFF switch
5
.
Once the machine is running, you can release
the safety lock-out
6
. The LED work light
7
lights up when the ON/OFF switch
5
is
pressed lightly or fully .
This provides illumination of the work area in
poor lighting conditions .
Summary of Contents for PAR 12 A1
Page 3: ......