
PAP 20 A3
GB
│
CY
│
9
■
CAUTION!
♦
If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged.
♦
If the red and green control LEDs both
flash, this means that the battery pack is
broken.
♦
Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains power
socket.
Checking the battery charge level
♦
Press the battery charge level button to check
the status of the battery (see also main diagram).
The status/remaining charge will be shown on the
battery display LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
IB_339125_PAP20A3_LB7.indb 9
26.03.20 10:36
Summary of Contents for PAP 20 A3
Page 3: ...A ...
Page 126: ...PAP 20 A3 122 GR CY ...