Parkside PAMFW 20-LI A1, Translation Of The Original Instructions, Page: 13 / 93

PAMFW 20-Li A1 GB
│
CY
│
9 ■
Application
–
removing material residues, such as tile
adhesive, when replacing damaged tiles
–
milling grout on wall and floor tiles.
IAN 360583
A1
Scraper
Materials
mortar/concrete residues, tile/carpet glue, paint/
silicone residues
Application
–
removing material residues, such as carpet glue
residue on the floor.
Sanding plate
Materials
Wood and metal (sanding sheets supplied),
wood*, metal*
* Depending on the sanding sheet
Application
–
sanding up to edges and hard-to-reach areas.
Fitting the sanding sheet onto the
sanding plate
♦ Place the sanding sheet centrally on the
sanding plate .
Changing tools
NOTE
► If you plan to use the dust extraction unit, it
must be connected before fitting or changing
the tool (see. section "Connecting a dust
extraction unit").
WARNING! RISK OF INJURY!
■ Always remove the battery before working on
the power tool.
♦ If necessary, remove an already fitted tool.
To do this, raise the tool release lever .
♦ Fit the tool (e.g. the plunge saw blade ) onto
the tool holder.
NOTE
► You can fit the tools in any snap position on
the tool holder.
♦ Lock the tool into place by pushing the tool
release lever back down again.
■ Check that the tool is fitted firmly. Incorrectly
or insecurely fitted tools can come loose during
use and cause you an injury.