Parkside PAH 1700 B2, Translation Of The Original Instructions, Page: 8 / 40

3 PAH 1700 B2
GB
IE
NI
■
Declaration of conformity
(see chapter “Declaration of
conformity”):
Products marked with this symbol
meet all applicable Community
regulations for the European
Economic Area.
■
This test seal confirms that
the demolition breaker is
safe if used in the proper
way. The “GS” symbol
stands for certified safety.
Products marked
with this symbol meet
the requirements of the
German Product Safety
Act (ProdSG).
■
The demolition breaker complies
with protection class II.
■
Do not dispose of old appliances
with your household waste.
■
Guaranteed sound power level
L
WA
in dB.
Chiselling: ah
(CHeq)
= 20.989m/s
2
,
K = 1.5 m/s
2
Symbols used on the appliance
►
The vibration level specified in these
instructions has been measured in
accordance with a standardised
measuring procedure and can be
used for equipment comparisons. The
specified vibration emission value can
also be used to make an initial exposure
estimate.
NOTE
►
The vibration level varies in accordance
with the use of the power tool and may
be higher than the value specified in
these instructions in some cases. Regular
use of the power tool in this way may
cause the user to underestimate the
vibration. Try to keep the vibration loads
as low as possible. Measures to reduce
the vibration load are, e.g. wearing
gloves and limiting the working time.
Wherein all states of operation must be
included (e.g. times when the power
tool is switched off and times where the
power tool is switched on but running
without load).
WARNING!
■
Read the operating instructions.
■
Wear hearing protection.
■
Wear a dust mask.
■
Wear safety goggles.
■
Wear safety gloves.