PABS 12 B2
GB
│
19
■
Changing tools
Your cordless drill has a fully automatic spindle
lock
.
When the motor is stopped, the power train locks
so that the quick-release chuck can be opened
by turning it
. Once you have attached the
desired tool and tightened it by turning the chuck
, you can continue working. The spindle lock is
automatically released when the motor starts (ON/
OFF switch pressed).
2 speed gearbox
CAUTION!
►
Operate the speed selection switch only
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear (speed selector switch
in posi-
tion: 1)
you can reach a speed of approx. 350 rpm and a
high torque. This setting is suitable for all screwing
jobs.
In second gear (speed selector switch
in
position: 2)
you can reach a speed of approx. 1300 rpm for
carrying out drilling work.
Torque selection ring/drill setting
You can set the torque using the torque selection
ring .
♦
Select a low level for small screws or soft
materials.
♦
Select a high level for large screws, hard
materials or removing screws.
♦
Select the drill setting for drilling work by ad-
justing the torque selection ring to the
position .
♦
Push the speed selector to the rear for drilling
work (position: 2).
Operation
Change direction of rotation/unlock
appliance
♦
Unlock the appliance and change the direction
of rotation by pressing the rotation direction
switch towards the left or right.
Switching on and off
Switching on:
♦
To start the appliance, press the ON/OFF
switch and keep it pressed in. The LED work
light lights up when the ON/OFF switch
is depressed lightly or fully. This allows for illumi-
nation of the work area in low lighting.
Switching off:
♦
Release the appliance's ON/OFF switch to
switch off the appliance.
Adjusting the rotational speed
The ON/OFF switch has a variable speed
control. Pressing the ON/OFF switch lightly
yields a low speed. Increasing pressure increases
the speed.
NOTE
►
The integrated motor brake ensures rapid
stoppage.
Activate lock
♦
Push the rotation direction switch into the
middle position. The ON/OFF switch is
blocked.
IB_279870_PABS12B2_LB1.indb 19
02.08.16 09:51
