Parkside PABH 20-Li B2, Instructions Manual

Page: 13 / 75

PABH 20-Li B2 GB
│
IE
│
NI
│
9 ■
Switching on/off
Switching on
♦ To start the power tool, press the on/off switch
and keep it pressed in.
■ The lamp lights up when the on/off switch
is pushed in slightly or fully and illuminates the
working area in low light conditions.
Switching off
♦ To switch off the power tool, let go of the on/
off switch .
■ At low temperatures, the power tool will only
reach its full hammer performance/strike power
after a certain time.
■ To save energy, do not switch the power tool
on unless you plan to use it.
Set drill/hammer speed
■ You can infinitely adjust the drill/hammer speed
of the switched on power tool, depending on
how far the on/off switch is pressed in.
Pressing the on/off switch lightly yields a
low drill/hammer speed. Increasing pressure
increases the speed.
Run-on brake
■ When you release the on/off switch , the
brake stops the chuck and prevents run-on of
the tool.
Maintenance and cleaning
WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
■ The cordless hammer drill is maintenance-free.
■ Use a soft, dry cloth to clean the housing.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as carbon
brushes, switch) can be ordered via our
service hotline.
Disposal
The packaging protects the device
from damage during transport. The
packaging materials have been selected
for their environmental friendliness and
disposal attributes, and are therefore
recyclable.
Returning the packaging into the material cycle
conserves raw materials and reduces the amount of
waste generated. Dispose of packaging materials
that are no longer needed in accordance with
applicable local regulations.
NOTE
► If possible, keep the original packaging of the
device for the entire duration of the warranty
period so that the device can be packed
properly for return shipment in the event of a
warranty claim.
IB_360585_PABH20-LiB2_LB6.indb 9 28.12.2020 14:33:24