Parkside KH 3145 ELECTRIC TACKER, Operation And Safety Notes

Page: 4 / 10

6 GB / IE
Electric tacker PET 23 VARIO
L
Introduction
L
For your safety
Please make sure that you familiarise
yourself fully with the way the product
works before you use it for the first
time and that you understand how properly to handle
electrical power tools. Further details can be found
in the operating instructions. In addition to the above,
you must also strictly observe the general safety
advice contained in the accompanying booklet.
Use the product only as described and for the indi-
cated purposes. Keep these instructions in a safe
place. If you pass the product on to anyone else,
please ensure that you also pass on all the docu-
mentation.
L
Proper use
The electric tacker is suitable for domestic use only
and is intended exclusively for stapling cardboard,
insulation, leather, cloth (textile or natural fibres) or
similar materials on to hardwood, softwood,
chipboard or similar plywood-type materials.
The required power supply is a 230 V ~ 50 Hz mains
circuit (fitted with a maximum 16 A fuse or trip). The
device is suitable for use in dry rooms only. Any im-
proper use gives rise to serious danger of accident
and invalidates the guarantee.
L
Features and equipment
(See Fig. A)
Q
Hand grip
W
Trigger
E
Front plate
R
Nose
T
Magazine
Y
Variable impact force controller
U
Magazine slider
I
On / off switch
O
Mains lead
P
Hexagonal socket screw key
L
Included items
1 Electric tacker PET 23 Vario
Light wire staples: type 53
Narrow-backed staples: type 55
Nails: type 47
1 Hexagonal socket screw key
1 Operating instructions
1 Booklet “General safety advice”
1 Booklet “Guarantee and service”
L
Technical information
Nominal voltage: 230 V ~ 50 Hz
Impact cycles: 30 / min
Short-term
operation time (KB):
max. 15 min
Protection class: II /
Sound pressure level (A): 95,0 dB(A)
Sound pressure level (C): 105,0 dB(C)
Sound power level:
108,0 dB(A)
Vibrations: 5,58 m / s
2
L
Staples / nails
Note:
The precision components of the device
are designed to use the following standard, widely
available staples and nails.
Type mm
55
12, 14, 16, 18, 19
53
12, 14, 18
47
23
The following information shall be considered as
recommendatory only. Determine for yourself by
practical tests the best staple or nail type and the
optimum impact force setting for your substrate.
Introduction