10 GB/IE/CY
paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
Short-
circuiting the contacts of a rechargeable battery
unit may result in heat damage or fire.
d)
WARNING!
Fluids may leak out of
rechargeable battery units if they are
misused. If this happens, avoid contact
with the fluid. If contact occurs, flush
the affected area with water. Seek
additional medical help if any of the
fluid gets into your eyes.
Escaping bat-
tery fluid may cause skin irritation or burns.
Safety advice for all uses
General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:
a)
This electrical power tool is intended
for use as a grinding, sanding, wire-
brushing, and disc-cutting machine.
Observe all the safety advice, instructions, in-
formation in figures and all other information
you received with this device. If you do not
observe the following advice it could lead to
electric shock, fire and / or serious injury.
b) Normative statement / advice for this tool is not
applicable.
c)
Do not use any accessory not specifi-
cally intended by the manufacturer
for this electrical power tool.
Although
an accessory may fit on your electrical power
tool, this does not on its own guarantee that it
can be safely used.
d)
The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool.
An accessory rotating
faster than its permitted speed could disintegrate
or fly off.
e)
The external diameter and the thickness
of the attachment must be compatible
with the dimensions of your electrical
power tool.
Attachments that are not dimen-
sionally compatible cannot be adequately
guarded or controlled.
f)
Grinding discs, flanges, grinding
wheels or other accessories must fit
exactly on to the spindle of your elec-
trical power tool.
Attachments that do not
exactly fit on the spindle turn unevenly, vibrate
severely and could lead to loss of control.
g)
Do not use damaged attachments.
Before every use check attachments
such as grinding discs for loose frag-
ments and cracks, grinding wheels for
cracks, deterioration or excessive
wear and wire brushes for loose or
broken wires. If the electrical power
tool or attachment is dropped, inspect
for damage or change the attachment
for an undamaged one. When you
have inspected and inserted the at-
tachment, position yourself and by-
standers away from the plane of the
rotating attachment and run the device
at maximum speed for one minute.
Damaged attachments will usually break apart
during this test.
h)
Wear personal protective
equipment. Use a full face vi-
sor, safety goggles or safety
glasses, depending on the application.
Wear a dust mask, hearing protectors,
safety gloves or special apron capable
of stopping particles of the grinding
medium or workpiece, as appropriate
for the task.
Eyes must be protected from
the flying debris which can arise from some
operations. Dust or breathing masks must be
capable of filtering out the dust generated by
the application. Prolonged exposure to loud
noise can lead to hearing loss.
i)
Keep bystanders at a safe distance
from your work area. Anyone entering
the work area must wear personal
protective equipment.
Fragments of the
workpiece or of a broken attachment could fly
off and cause injury beyond the immediate
working area.
j)
Hold the device by the insulated han-
dle surfaces when you are undertak-
General safety advice for electrical power tools
