Parkside BMH 1100, Operation And Safety Notes

Page: 11 / 82

GB/IE/
CY
11
4. Items supplied
Take all the parts out of the packaging.
Check that nothing is missing.
BMH 1100 hammer drill
Additional handle
Depth stop
Drill bits for stone (6, 8, 10 mm)
Pointed chisel / flat chisel
Additional scroll chuck
Operating instructions
Dust absorption device
Chuck key
5. Proper use
The tool is designed for drilling with hammer
action in concrete, rock and brick, as well as
for chiseling work, always using the respective
correct drill or chisel bit.
The equipment is to be used only for its
prescribed purpose. Any other use is deemed
to be a case of misuse. The user / operator
and not the manufacturer will be liable for any
damage or injuries of any kind caused as a
result of this.
Please note that our equipment has not been
designed for use in commercial, trade or
industrial applications. Our warranty will be
voided if the machine is used in commercial,
trade or industrial businesses or for equivalent
purposes.
6. Technical data
Mains voltage: 230 V ~ 50 Hz
Power input: 1050 W
Idling speed: 0-1100 rpm
Blow rate: 0-5100 rpm
Drilling capacity in
concrete/stone (max.): 26 mm
Protection class: II /
쓑
Weight: 3.6 kg
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
L
pA
sound pressure level 91.8 dB(A)
K
pA
uncertainty 3 dB
L
WA
sound power level 102.8 dB(A)
K
WA
uncertainty 3 dB
The hammer drill is not designed for outdoors
use as specified I Article 3 of Directive
2000/14/EC_2005/88/EC.
Wear ear-muffs.
The impact of noise can cause damage to
hearing.
Total vibration values (vector sum of three
directions) determined in accordance with EN
60745.
Hammer drilling in concrete
Vibration emission value a
h
= 15.81 m/s 2
K uncertainty = 1.5 m/s 2
Chiseling
Vibration emission value a
h
= 15.668 m/s 2
K uncertainty = 1.5 m/s 2
Important!
The vibration value changes according to the
area of application of the electric tool and may
Anleitung_BMH_1100_4258398:_ 21.11.2008 7:40 Uhr Seite 11