Parkside 391284 2201, Translation Of The Original Instructions

Page: 13 / 199

GB
│
IE
│ 9 ■ PAAP 12 C3
Checking the battery charge level
When the appliance is switched on, the remaining
charge is shown on the battery LED as follows:
RED/ORANGE/GREEN = maximum charge
RED/ORANGE = medium charge
RED = low charge – charge the battery
Assembly/disassembly
of the polishing disc
♦ Press the spindle lock and hold it down.
♦ Screw the polishing disc clockwise onto the
screw thread .
♦ Proceed in the reverse order to remove the
polishing disc .
Fitting the attachments
ATTENTION!
► Be sure to remove the battery pack before
fitting or removing the attachments , ,
, .
♦ The polishing disc and supplied attach-
ments , , , are fitted with corre-
sponding Velcro fasteners.
♦ To change them, lift the side of the attach-
ment , , , and pull it off the polish-
ing disc .
♦ First choose a sandpaper for sanding and
press it onto the polishing disc . Make sure
it is properly centred.
♦ Now select the polishing hood (orange)
for pre-polishing and push it onto the polishing
disc . Make sure it is properly centred.
♦ Now select the polishing hood (black) for
final polishing and press it onto the polishing
disc . Make sure it is properly centred.
♦ For the final finish, select the fake fur attach-
ment and press it onto the polishing
disc . Make sure it is properly centred.
Fitting the additional handle
♦ The additional handle can be screwed onto
the left or right side of the appliance head,
depending on the mode of operation.
Use
NOTE
► Always switch the hand grinder on before
applying it to the workpiece.
Switching the appliance on
♦ Press the safety lock-out on the side
with the
symbol to unlock the ON/OFF
switch .
♦ Press the ON/OFF switch .
Switching the appliance off
♦ Release the ON/OFF switch .
♦ Press the safety lock-out on the side
with the symbol to lock the ON/OFF
switch .
2-speed gearbox
CAUTION!
► Operate the speed selector switch only
when the appliance is at a standstill. Other-
wise the appliance can be damaged.
In first gear
(speed selector switch
in position 1)
you can reach a speed of approx. 2800 rpm.
In second gear
(speed selector switch
in position 2)
you can reach a speed of approx. 8300 rpm.
Grinding
WARNING!
► Dust from materials such as paints, some
types of wood and metal can be harmful to
health.
► Contact with or inhalation of these dusts can
represent a health hazard for the person
operating the appliance and any other
people in the vicinity.
► Wear safety goggles and a protective dust
mask!