![background image](http://html1.mh-extra.com/html/parkside/382543-2110/382543-2110_operating-instructions-manual_4045228011.webp)
PUD 30 A1
■
8
│
GB
│
IE
T-joints
♦
Remove the stop if necessary .
♦
Draw a line on wooden workpiece where you want to attach
wooden workpiece (see Fig . H) .
♦
Clamp wooden workpiece at a distance of 35 mm to the marked
line parallel on wooden workpiece (see Fig . H) .
♦
Readjust the drilling depth to minus 6 mm of the thickness of
wooden workpiece plus 26 mm for the thickness of the product
itself .
♦
Slide the product with the matching guide groove to the drill
bush over the dowel flush with wooden workpiece (see Fig . H) .
♦
Insert the drill into the drill bush and drill a hole (see Fig . H) .
♦
Fill the drill holes with wood glue .
♦
Join the two wooden workpieces .
Maintenance and storage
ATTENTION! PROPERTY DAMAGE!
►
Do not use aggressive or abrasive cleaning agents, as they can
damage the surfaces of the product .
♦
Use a soft dry brush to remove the sawdust from the product .
♦
You can also clean the product using a dry cloth .
♦
Store the product in a clean, dry location away from direct
sunlight .
IB_382543_PUD30A1_LB8.indb 8
IB_382543_PUD30A1_LB8.indb 8
23.02.2022 09:22:00
23.02.2022 09:22:00