Parkside 380558 2110, Operating Instructions Manual

Page: 6 / 99

PHZ 3 A1
■ 4 │ GB │ IE
Package contents
▯ Hammer Pull Bar
▯ These operating instructions
NOTE
► Check the package for completeness and signs of visible damage.
► If the delivery is incomplete or damage has occurred as a result
of defective packaging or during transport, contact the customer
service hotline (see section
Service
).
Use
NOTE
► The product can be used for all material thicknesses from 7 to
13 mm.
With the help of the product, you can join laminate and parquet boards
without joints and without the need for hammers, tapping wood and
pull bars. The integrated pull bar transfers the force to the edge of the
board when pulling the carriage towards the rear stop. The product is
particularly suitable for the last row of boards by the wall.
♦ Place the pull bar on a board.
♦ Loosen the black locking screw on the carriage so you can move
the carriage.
♦ Hold the back stop with one hand to stabilise the product.
IB_380558_PHZ3A1_LB8.indb 4 01.04.2022 13:22:24