11
GB/IE/NI
Before use
Note:
To operate the product, insert the included battery (9 V block). Proceed as
described below:
Inserting / changing the battery
To insert / change the 9 V block battery
14
, open the battery cover
4
. To do
so, slide the battery cover in the direction of the arrow and flip open.
If applicable, remove the old 9 V block battery and insert a new one. If neces-
sary, clean the contacts of the battery compartment and the 9 V block battery.
Only use a 9 V block battery type 6F22 or 6LR61.
Ensure the correct polarity when inserting the 9 V block battery. This is indicated
on the battery cover (Fig. C).
Close the battery cover.
Your infrared thermometer is now ready for use.
Start-up
Hold the handle of the product so the index finger can operate the Measure
button
3
and the thumb buttons
10
to
12
.
Switching on and off
Press measure button
3
or the ON/OFF button
13
to switch on the product.
The display
5
will light up and a brief tone will sound.
Press and hold the ON/OFF button
13
to switch off the product. Two brief
tones will sound.
When the product is no longer being used, the backlight of the display swill
switch off after approx. 15 seconds. After approx. 60 seconds the product
will automatically switch off; this is indicated by two brief tones.
Summary of Contents for 374243 2104
Page 3: ...A B C 1 2 5 6 7 8 9 4 10 12 5 3 4 11 14 13 ...
Page 4: ......
