Parkside 373118-2104, Translation Of The Original Instructions, Page: 12 / 40

PMFW 310 D2
GB
│
IE
│
NI
│
CY
│ 9 ■
Selecting oscillation speed
♦ Use the speed adjustment wheel to set the
required oscillation speed .
Level 1: low speed
Level 6: high speed
NOTE
► The required speed depends on the material
being worked and on the working conditions
and can be determined through practical
tests .
Maintenance and cleaning
WARNING! RISK OF INJURY!
Before carrying out any work on
the appliance, switch it off and
disconnect the mains plug.
■ Do not use any sharp objects to clean the
appliance . Do not allow any liquids to get into
the appliance . This can damage the appliance .
■ Clean the appliance regularly, preferably
immediately after completion of the work .
■ Clean the housing with a dry cloth – do NOT
use petrol, solvents or cleaners that can attack
the plastic .
■ A vacuum cleaner is required for thorough
cleaning of the appliance .
■ Ventilation openings must never be obstructed .
■ Remove any adhering grinding dust with a
brush .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches and replacement batteries)
can be ordered via our service hotline .
Kompernass Handels GmbH
warranty
Dear Customer,
This appliance has a 3-year warranty valid from
the date of purchase . If this product has any faults,
you, the buyer, have certain statutory rights . Your
statutory rights are not restricted in any way by the
warranty described below .
Warranty conditions
The warranty period starts on the date of purchase .
Please keep your receipt in a safe place . This will
be required as proof of purchase .
If any material or manufacturing fault occurs within
three years of the date of purchase of the product,
we will either repair or replace the product for you
or refund the purchase price (at our discretion) .
This warranty service requires that you present the
defective appliance and the proof of purchase
(receipt) within the three-year warranty period,
along with a brief written description of the fault
and of when it occurred .
If the defect is covered by the warranty, your
product will either be repaired or replaced by us .
The repair or replacement of a product does not
signify the beginning of a new warranty period .
Warranty period and statutory claims for
defects
The warranty period is not prolonged by repairs
effected under the warranty . This also applies to
replaced and repaired components . Any damage
and defects present at the time of purchase must
be reported immediately after unpacking . Repairs
carried out after expiry of the warranty period shall
be subject to a fee .