![background image](http://html1.mh-extra.com/html/parkside/364186-2010/364186-2010_operating-instructions-manual_758356009.webp)
PUD 30 A1
■
6
│
GB
│
IE
Corner joints
♦
Attach the adjustable stop to the underside of the product and
screw in the locking screw loosely (see Fig. D).
♦
Place the drill bush onto a dowel on wooden workpiece .
Push the adjustable stop against wooden workpiece , tighten the
locking screw and remove the product (see Fig. E). This determines
the correct spacing for the drill holes in wooden workpiece .
♦
Place wooden workpiece parallel onto wooden workpiece
(see Fig. F).
♦
Push the product up to the stop on wooden workpiece (see Fig. F).
♦
Clamp both wooden workpieces firmly into place.
♦
Readjust the drilling depth to minus 6 mm of the thickness of
wooden workpiece plus 26 mm for the thickness of the product
itself.
♦
Slide the product with the matching guide groove to the drill bush
over the dowel until it stops (see Fig. F).
♦
Insert the drill into the drill bush and drill a hole (see Fig. F).
♦
Fill the drill holes with wood glue.
♦
Join the two wooden workpieces.
IB_364186_PUD30A1_LB8.indb 6
12.03.2021 10:09:37