PAGG 4 A1
GB
│
MT
│
57
■
d)
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock .
e)
When operating a power tool outdoors, use an extension cord
suitable for outdoor use.
Use of a cord suitable for outdoor use
reduces the risk of electric shock .
f)
If operating a power tool in a damp location is unavoidable,
use a residual current device (RCD) protected supply.
Use of
an RCD reduces the risk of electric shock .
3 . Personal safety
a)
Stay alert, watch what you are doing and use common sense
when operating a power tool. Do not use a power tool while
you are tired or under the influence of drugs, alcohol or medi-
cation.
A moment of inattention while operating power tools may
result in serious personal injury .
b)
Use personal protective equipment. Always wear eye protec-
tion.
Protective equipment such as a dust mask, non-skid safety
shoes, hard hat or hearing protection used for appropriate condi-
tions will reduce personal injuries .
c)
Prevent unintentional starting. Ensure the switch is in the off-po-
sition before connecting to power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your
finger on the switch or energising power tools that have the
switch on invites accidents .
d)
Remove any adjusting key or wrench before turning the power
tool on.
A wrench or a key left attached to a rotating part of the
power tool may result in personal injury .
e)
Do not overreach. Keep proper footing and balance at all
times.
This enables better control of the power tool in unexpected
situations .
Summary of Contents for 359506 2101
Page 3: ......
Page 29: ...PAGG 4 A1 26 ES...
