Parkside 353273 2007, Instructions Manual

Page: 16 / 58

PTS 710 A2 GB
│
IE
│
NI
│
CY
│
13 ■
Types of saw blades
The types of saw blades supplied cover the
most common fields of application.
HSS circular saw blade Z89/60
Description: Ø 89 mm, 60 teeth
Suitable for: Softwood and soft metals
HSS circular saw blade Z89/80
Description: Ø 89 mm, 80 teeth
Suitable for: Softwood and soft metals
Diamond-coated cutting saw blade Z89
Description: Ø 89 mm
Suitable for: Ceramics and stone
TCT saw blade Z89/30
Description: Ø 89 mm, 30 teeth
Suitability: Wood and plastic
Markings for cutting line
The viewing window for the cutting line helps you
accurately guide machine along the cutting line on
the workpiece.
♦ For a true-to-size cut, place the machine onto
the workpiece so that the cut marking appears
in the viewing window for the cutting line .
Connecting the sawdust extractor
NOTE
► When working on wood for long periods of
time, and especially when working on mate-
rials that generate dust that is hazardous to
health, connect the unit to an external dust
extraction device suitable for the material.
► Check that the dust extraction unit is correctly
attached.
► Also observe the operating instructions for the
dust extraction device .
► Observe the regulations valid in your country
for the materials to be processed.
♦ Push the suction hose onto the dust extractor
connection and lock it in place.
♦ Attach an approved dust and sawdust extractor
to the suction hose .
Changing the saw blade
WARNING! RISK OF INJURY!
Always remove the plug from the
mains power socket before carrying
out any work on the appliance.
1. Actuate the spindle lock and use the hex
key to loosen the tensioning screw (turn
clockwise to open). Now remove the tensioning
screw and the clamping flange (see also
Fig. B).
2. Set the cutting depth to the maximum position.
3. Activate the safety lock-out and keep it in
that position. Swivel the base plate upwards.
4. Remove the saw blade .
5. Fit the saw blade in the reverse order as
described.
6. Press the spindle lock button (until it
engages) and use the hex key to tighten
the tensioning screw .
■ The arrow on the saw blade must correspond to
the arrow showing the direction of rotation
(running direction shown on the appliance).