![background image](http://html1.mh-extra.com/html/parkside/345153_2004/345153_2004_translation-of-the-original-instructions_4114175059.webp)
PFBS 12 B3
■
56
│
GB
│
MT
e)
If the cutting disc jams or you stop working,
switch the tool off and hold it steady until the
disc has completely stopped turning. Never
attempt to pull a rotating cutting disc out of a
cut. This could lead to kickback.
Identify and
remove the cause of the jam .
f)
Do not switch the power tool back on while it
is still in the workpiece. Allow the cutting disc
to reach its full speed before you carefully
resume the cut.
Otherwise, the disc may jam,
jump out of the workpiece or cause kickback .
g)
Support panels or large workpieces to
reduce the risk of the cutting disc jamming
and causing a kickback.
Large workpieces can
bend under their own weight . The workpiece
must be supported on both sides, namely in the
vicinity of the cut, and also at the edge .
h)
Be particularly careful when making “pocket
cuts” into existing walls or other obscured
areas.
The inserted cutting disc may cut into
gas or water pipes, electrical wiring or other
objects that can cause kickback .
Supplementary safety instructions
for working with wire brushes
Special safety instructions for working with
wire brushes
a)
Be aware that the brush can lose wire bristles
even during normal operation. Do not
overstress the wires by applying excessive
pressure to the brush.
The wire bristles can
easily penetrate light clothing and/or skin .
b)
Allow the brush to run at working speed for
at least one minute before applying it to the
workpiece. Ensure that no one is standing in
front of or in line with the brush during this
time.
Loose pieces of wire can fly off during the
run-in period .
c)
Aim the rotating steel brush away from your
self.
When working with these brushes, small
particles and minute pieces of wire can fly off at
great speed and pierce skin .
Safety guidelines for battery
chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited phy sical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks may not be carried out by
children unless they are supervised .
■
To avoid potential risks, damaged
mains cables should be replaced
by the manufacturer, their customer
service department or a similarly
qualified person .
The charger is suitable
for indoor use only .
WARNING!
■
Do not operate the appliance with a dam-
aged cable, power cord or mains plug .
A damaged power cord poses a threat of
fatal electric shock .
Use
■
Never use the appliance for other purposes
and use it only with original parts/acces
sories.
Using attachments or accessory tools
other than those recommended in the operating
instructions can lead to a risk of injury .
Summary of Contents for 345153_2004
Page 3: ...A B...