Parkside 345153 2004, Translation Of The Original Instructions, Page: 6 / 50

PFBS 12 B3
GB
│
IE
│
NI
│
CY
│ 3 ■
Charger PFBS 12 B3-1
Primary (input)
Rated voltage 100–240 V ∼,
50/60 Hz
(AC)
Rated current 0 .8 A
Secondary (output)
Rated voltage 13 V (DC)
Rated current 1 .5 A
SMPS – switched-
mode power supply
Charging time
approx . 1 hour
Safety transformer short-circuit-proof
Protection class II / (double insulation)
Polarity
Protection type
IP20 Protection against
solid objects with a
diameter of more than
12 .5 mm
Fuse (internal) 2 A T2A
Noise emission value
Noise measurement value determined in accord-
ance with EN 60745 . The A-rated noise level of
the power tool is typically as follows:
Sound pressure level
L
pA
= 61 .8 dB (A)
Uncertainty K
pA
= 3 dB
Sound power level L
WA
= 72 .8 dB (A)
Uncertainty K K
WA
= 3 dB
Wear hearing protection!
Total vibration value
a
h, SG
= 1,216 m/s
2
Uncertainty K = 1 .5 m/s
2
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool .
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate .
WARNING!
► Depending on the manner in which the pow-
er tool is being used, and in particular the
kind of workpiece that is being worked, the
vibration and noise emission values can devi-
ate from the values given in these instructions
during actual use of the power tool .
► Try to keep the load as low as possible .
Measures to reduce the vibration load are,
e .g . wearing gloves and limiting the working
time . Wherein all states of operation must be
included (e .g . times when the power tool is
switched off and times where the power tool
is switched on but running without load) .
General power tool
safety warnings
WARNING!
► Read all safety warnings and all
instructions . Failure to follow the
warnings and instructions may
result in electric shock, fire and/or
serious injury .
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-
operated (cordless) power tool .