Parkside 343406 1910, Translation Of The Original Instructions

Page: 11 / 29

PASSK 20-Li A1
GB
│
IE
│
NI
│ 7 ■
Safety guidelines for battery
chargers
■
This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks . Do not allow
children to use the appliance as a
toy . Cleaning and user maintenance
tasks must not be carried out by
children unless they are supervised .
The charger is suitable
for indoor use only .
ATTENTION!
♦ This charger can only charge the following
batteries: PAP 20 A1/PAP 20 A2/PAP 20 A3 .
♦ A current list of battery compatibility can be
found at www .lidl .de/Akku .
WARNING!
■ To avoid potential risks, damaged mains
cables should be replaced by the manufac-
turer, their customer service department or a
similarly qualified person .
Original accessories/auxiliary
equipment
Use only accessories and auxiliary equipment
specified in the operating instructions and which
are compatible with the appliance.
WARNING!
■ Do not use any accessories which are not
recommended by PARKSIDE . This can lead to
an electric shock and fire .
ATTENTION!
Hot surface .
There is a risk of burns .
Before use
Charging the battery pack (see fig . A)
CAUTION!
► Always pull out the power plug before you
remove the battery pack from or connect the
battery pack to the charger .
NOTE
► Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C .
If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly . The optimum charge level
is between 50% and 80% . The storage cli-
mate should be cool and dry and the ambi-
ent temperature should be between 0°C and
50°C .
♦ Connect the battery pack to the high-speed
battery charger (see Fig . A) .
♦ Insert the power plug into the socket . The control
LED lights up red .
♦ The green LED indicates that the charging
process is complete and the battery pack
is ready for use .
CAUTION!
♦ If the red control LED flashes, this means
that the battery pack has overheated and
cannot be charged .
♦ If the red and green control LEDs both
flash, this means that the battery pack is
defective .
♦ Push the battery pack back into the appliance .
♦ Switch off the charger for at least 15 minutes
between successive charging sessions . Also dis-
connect the power plug from the mains power
socket .