Parkside 332673 1907, Translation Of The Original Instructions

Page: 20 / 90

20
GB IE
Connecting the water
supply
Connecting to the domestic
water connection
1. Connect the supply hose to the water
supply. Bleed the hose by allowing wa-
ter to flow bubble-free out of the other
end of the supply hose. Close the tap.
2. Connect the hose coupling of the supply
hose to the water connection (4) on the
device.
Suctioning water
• You can also use the device indepen
-
dently of the water pipe (for example,
with a rain barrel) through the integrat-
ed water suction function. This function
must only be used with a suction hose
with a filter basket.
The device itself must not be immer-
sed in open water sources. There
is a risk of personal injury from an
electric shock.
Do not draw in any water from na-
tural accumulations. There is a risk
of contamination from backwashed
cleaning agent.
1. Connect the suction hose with filter bas
-
ket to the coupling (11) on the device.
2. Insert the end with the filter basket into
the water collector (e.g. rain barrel).
Ensure there is a sufficient and reliable
water supply.
Bleeding the hose
Make sure that there is no air in the suction
hose. Immerse the suction hose and filter
basket (11) completely into the water col-
lector (e.g. rain barrel) to bleed it.
Dry running will damage the device
Inserting/removing the
rechargeable battery
1. To insert the battery (13) into the
device, push the battery (13) along the
guide rail into the device. You will hear
it click into place.
2. To remove the battery (13) from the
device, press the release button (14)
on the battery and pull the battery (13)
out.
Attaching the spray lance/
cleaning agent nozzle
1. Connect the spray lance (9) or the clea-
ning agent nozzle (7) to the cordless
pressure washer by inserting and
screwing in (bayonet locking device).
2. Attachments are removed in reverse
order.
Operation
Be prepared for the recoil
force of the emitted wa-
ter jet! Ensure that you are
standing firmly and that you
are holding the gun securely,
otherwise you could injure
yourself or other people.
Never operate the pressure cleaner
with a closed water tap. Dry run-
ning will damage the pressure
cleaner!
1. Only use the device after you have
connected the water supply and the
connection is tight.
2. Press the release button (2) and then
the switch lever (3). You can then let
go of the release button (2).