PMB 1100 A1
GB
│
MT
│
│
41
■
5. Service
a)
Have your power tool serviced by a qualified
repair person using only identical replace-
ment parts.
This will ensure that the safety of
the power tool is maintained.
Additional safety instructions for
band saws
■
Hold the appliance by the insulated grip-
ping surfaces when performing work
where the cutting tool may come into con-
tact with hidden cables or its connecting
cable.
If the cutting tool comes into contact with
a live wire, this may make exposed metal parts
of the power tool live and could give the opera-
tor an electric shock.
■
Keep your hands out of the sawing area and
away from the saw blade.
■
Always make sure that the portable band saw is
clean before use.
■
Always stop working immediately if you notice
anything unusual.
■
Before using the tool, always ensure that all
components are properly and safely assem-
bled.
■
Always be careful when attaching or removing
the band saw blade.
■
Always keep your hands away from the cutting
path of the band saw blade.
■
Always wait until the motor has reached full
speed before sawing.
■
Keep the handles dry, clean and free from oil
and grease. Hold the tool firmly while working.
■
Always be vigilant, especially during repetitive,
monotonous operations. Always make sure that
your hands are in the correct position in relation
to the saw blade.
■
Never remove the workpiece stop.
■
Keep away from end pieces that fall down after
sawing. They can be hot, sharp and/or heavy.
This could result in serious injury.
■
Ventilation openings often cover moving parts and
should be kept free. Loose clothing, jewellery or
long hair can get caught in the moving parts.
WARNING!
►
The power tool creates an electromagnetic
field during operation. This field can, in cer-
tain circumstances, impair active or passive
medical implants. To reduce the risk of serious
or fatal injury, we recommend that individuals
with medical implants consult their physician
and the manufacturer of the medical implant
before operating the power tool.
Original accessories/auxiliary
equipment
Only use the accessories and additional equip-
ment that are specified in the operating instruc-
tions and compatible with the appliance.
Before use
WARNING! RISK OF INJURY!
Always remove the power plug from
the wall socket before carrying out any
work on the appliance.
Assembly
Mounting the vice
♦
Fasten the vice in the corresponding holes
on the back of the saw table using the 4 short
wing screws supplied (see fig. C on the fold-
out page).
Mounting the cutting angle adjustment on the
saw table
♦
Completely unscrew the screw from the
cutting angle adjustment . Insert the screw
through the angle recess on the saw table
from below and retighten it using the cutting
angle adjustment (see fig. D on the fold-out
page).
♦
Use a long wing screw to fasten the swivel
arm through the other hole on the saw table
(see fig. D on the fold-out page).
