Parkside 314091 1910, Translation Of The Original Instructions

Page: 20 / 76

GB
│
IE
│ 17 ■ PDRW 1800 A1
Operation
2-speed gearbox
CAUTION!
► Operate the speed selector switch
2
only
when the appliance is at a standstill . Other-
wise, the appliance could be damaged .
♦ Set the speed selector switch
2
to position "1"
for a lower speed range .
♦ Set the speed selector switch
2
to position "2"
for a higher speed range .
Switching the appliance on/off
Turn on
♦ Push in the safety button
8
and keep it
pushed in .
♦ Press the ON/OFF switch
9
and keep it
pressed in . You can now release the safety
button
8
.
Switching off
♦ Release the ON/OFF switch
9
.
Setting the speed
♦ Press the + button
6
to increase the speed .
♦ Press the – button
7
to reduce the speed .
Working with the stirrer
♦ Dip the two stirrers
4
into the material you
want to mix at a low speed .
♦ Once both stirrers
4
are completely immersed
in the material, you can increase the speed .
♦ During mixing, move the stirrers
4
through the
mixing container and keep stirring until the
material is thoroughly mixed .
Maintenance and cleaning
WARNING! RISK OF INJURY!
Always remove the plug from the
power socket before working on
the power tool.
■ Use a soft, dry cloth to clean the housing .
Never use petrol, solvents or cleaning agents
that can damage plastic .
■ Keep the appliance clean, dry and free from oil
or grease . Do not allow liquids to get into the
paint and mortar mixer .
■ Clean the paint and mortar mixer regularly;
preferably directly after finishing work .
NOTE
► Replacement parts not listed (such as carbon
brushes, switches) can be ordered via our
Service Hotline .
WARNING!
■ If the mains cable requires replacement, this
should be carried out by the manufacturer or
an approved representative to avoid safety
hazards .