Parkside 307721, Translation Of The Original Instructions

Page: 22 / 80

PFS 400 A1 GB
│
IE
│
19 ■
Switching on:
♦ Insert the plug into a mains power socket.
♦ To switch the appliance on, pull the trigger
and keep it pulled.
Switching off:
♦ To stop spraying, simply release the trigger .
♦ When you are finished working, disconnect the
plug from the mains power supply.
Selecting a spray profile
Setting the spray volume:
♦ Turn the spray volume adjusting wheel to the
desired position:
(–) = minimum spray volume
(+) = maximum spray volume
NOTE
► We recommend starting at the minimum
setting.
Selecting a jet type
♦ Undo the union nut .
♦ Turn the protruding parts of the nozzle head
so that they point to the desired symbol on the
spray unit .
The appliance has the following settings:
▯ round jet
vertical flat jet
horizontal flat jet
♦ Re-tighten the union nut .
Maintenance and cleaning
WARNING!
Disconnect the mains plug during
breaks and while doing maintenance
work on the appliance.
CAUTION!
► Never immerse the paint spray gun completely
in solvent.
NOTE
► Thorough cleaning after every use is very
important for safety and operation. Oth-
erwise, the needle could get blocked and
proper operation of the appliance cannot be
guaranteed.
■ Wear suitable gloves when cleaning.
■ After every use, squirt water through the
appliance.
♦ To clean the spray unit , nozzle head ,
nozzles and the spray holes inside, use the
supplied cleaning brush , cleaning needle
or a cloth. Never use petrol, solvents or cleans-
ers which can damage plastic.
♦ For rust protection purposes, you can spray a
little sewing machine oil through the spray gun
after cleaning.
♦ Oil all moving parts from time to time.
♦ Do not use any silicon-based lubricants.
♦ Store the appliance only in dry interior rooms.
Cleaning/replacing the air filter
Check the air filter regularly, otherwise malfunc-
tions may occur.
♦ Remove the screws from the air filter cover .
♦ Remove the air filter cover .
♦ Remove the air filter and examine it for
contamination.
♦ If necessary, shake out the air filter and
clean it under running water. Leave the air filter
to dry.