23
PLS 48 D2
GB
|
apron .
Avoid eating, drinking and smoking in rooms
where soldering is taking place . Otherwise,
traces of lead adhering to the hands could
get into the human organism through food or
cigarettes .
Remove inflammable objects, liquids and gases
from the working area of the device before use .
Keep your work area clean to prevent accidents .
Always thoroughly wash your hands after
soldering .
Never throw soldering waste into household
waste . Soldering waste is hazardous waste .
National and international safety, health and
work safety regulations must be observed .
After use, place the device on the stand and
allow it to cool off before packing it away .
When the device is not being used, keep it
in a safe place and protected from dust and
moisture .
Preparing for first use
Mount the coil spring
Insert the clip of the coil spring
u
as far as it will go into the recess
of the soldering station that is provided for this purpose (see foldout
page) .
Summary of Contents for 306960
Page 3: ... ...
