![background image](http://html1.mh-extra.com/html/parkside/306438/306438_translation-of-the-original-instructions_758321054.webp)
PSTKA 12 A1
■
50
│
GB
│
MT
NOTE
►
The battery pack is supplied partially charged.
Before first use, charge the battery pack in
the charger for at least 1 hour. This guarantees
full battery power. You can charge the lithium-
ion battery at any time without shortening
its service life. Interrupting the charging
process does not damage the batterybattery
pack.
►
If the battery pack overheats during opera-
tion, charging is not possible. Allow it to cool
down first.
■
Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
1. To remove the battery pack , press the release
button and pull the battery pack out of the
appliance.
2. Insert the battery pack into the high-speed
charger .
3. Insert the mains plug into the socket. The control
LED lights up red.
4. The green charge status indicator LED indi-
cates that the charging process is complete and
the battery pack is ready.
5. Insert the battery pack back into the appliance.
Use
Fitting/changing the saw blade
WARNING!
►
Wear protective gloves! There is a risk of
injury from the sharp cutting teeth.
►
Always remove the battery pack before car-
rying out any work on the appliance.
♦
Remove the blade guard .
♦
Turn the quick-release chuck and hold it in
this position.
♦
Push the required saw blade into the quick-
release chuck as far as the stop.
♦
Let go of the quick-release chuck so that it
returns to its initial position. The saw blade is
now locked.
♦
Check whether the saw blade is firmly fitted.
■
ATTENTION! The saw blade teeth must face the
front (see fold-out page)!
♦
Replace the blade guard on the appliance.
Fitting the rip fence
The rip fence can be fitted on the left or right of
the appliance.
♦
Undo both of the clamping screws on the inser-
tion openings .
♦
Push the rip fence into the insertion openings
.
♦
Retighten the two locking screws.
Connecting the sawdust extractor
♦
Push the reducer into the extraction nozzle
until it is firmly in place.
♦
Attach an approved dust and sawdust extractor
to the reducer or directly to the extraction
nozzle .
Fitting the splinter guard
The splinter guard can prevent the surface from
tearing up when sawing wood. The splinter guard
can only be used with certain sawblade types
and only at a cutting angle of 0°.
♦
Press the splinter guard into the footplate
from below (arrow pointing upwards).
The ▲ marking on the splinter guard points
towards the front of the appliance (see also fig. 1).
Fig. 1: Fitting the splinter guard
Summary of Contents for 306438
