■
2
│
GB
│
IE
│
NI
│
CY
PBS 900 C3
BELT SANDER PBS 900 C3
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.
Intended use
The belt sander is designed for the dry surface
sanding of wood, plastic, metal and plaster and
painted surfaces (depending on the type of sand-
paper used). The appliance may only be used
for dry sanding. Please note that you need to use
appropriate abrasive belts with different grains for
working different materials, and that you may need
to adapt the speed to suit the material. The appli-
ance is not intended for commercial use. Any other
uses of or modification to the appliance is deemed
to be improper and carries the risk of serious per-
sonal injury. The manufacturer accepts no responsi-
bility for damage(s) attributable to misuse.
Depicted components
Speed preselector wheel
Lock button
ON/OFF switch
Drive belt cover
Extraction nozzle
Adjustment screw for belt tracking
Additional handle
Ventilation slits
Clamping lever
Dust collector
Dust extraction adapter
Reducer
Screw clamps 2 x
Package contents
Check the package contents immediately
after unpacking the appliance:
1 belt sander PBS 900 C3
1 abrasive belt
1 dust collector
1 dust extraction adapter and reducer
(for external dust extraction)
2 screw clamps
1 set of operating instructions
Technical details
Rated voltage:
230 V ∼ 50 Hz
(alternating current)
Rated power
consumption:
900
W
Idling belt speed:
240–400 m/min
Rated idling speed:
n
0
450–750 rpm
Abrasive belt:
75 x 533 mm
Protection class:
II / (double insulation)
Noise emission value:
Noise measurement value determined in accordance
with EN 60745. The A-rated noise level of the tool
is typically:
Sound pressure level:
L
pA
= 85 dB(A)
Uncertainty:
K
pA
= 3 dB
Sound power level:
L
WA
= 96 dB(A)
Uncertainty:
K
WA
= 3 dB
Wear hearing protection!
Total vibration value:
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 60745:
Vibration emission value:
a
h
≤ 6,6 m/s
2
Uncertainty K = 1.5 m/s
2
Summary of Contents for 288077
