Parkside 285364, Translation Of The Original Instructions, Page: 55 / 100

55
GB MT
present a hazard to the opera-
tor or persons in the vicinity.
Make sure that the workplace
is well ventilated. Always
wear safety goggles, safety
gloves and respiratory protec-
tion. Attach a dust extraction
system.
1) SPECIAL SAFETY INFORMATION
FOR THE CORDLESS COMBINATION
TOOL
• Use the additional handles deliv-
ered with the appliance.
The loss of
control can result in injuries.
• Hold the electric tool by the insu-
lated handle surfaces when per-
forming work where the cutting
tool or screw may come into con-
tact with hidden wiring.
Contact
with a live wire can also cause a charge
in metal parts of the appliance and result
in an electric shock.
• Use suitable detectors in order to
ind hidden supply lines or ask
the local utility company. Contact
with electrical cables can lead to electric
shock and ire, contact with a gas pipe
can result in an explosion. Damage to
a water pipe can lead to property dam-
aged and electric shock.
• Secure the workpiece. A workpiece
that is retained with clamping appliances
or a vice is held more securely than with
your hand.
• Be very careful when handling
tools such as saws, scraper
blades and drills.
These are sharp
and present an injury hazard.
• Wear safety gloves when chang-
ing attachments.
This enables you
to avoid injuries if the appliance attach-
ment has heated up after use.
2) SPECIFIC SAFETY INSTRUCTIONS
WHEN SAWING
• Keep hands away from the saw-
ing area. Do not reach under-
neath the workpiece. Always
stand to the side of the saw
when working.
Upon contact with
the blade there is a risk of injury.
• Only when the electric tool is
turned on should the sawing
blade be moved against the
workpiece.
There is a risk of kickback
if the tool insert jams in the workpiece.
• Make sure that the footplate
is securely placed against the
workpiece during sawing.
The
sawblade can tilt and lead to loss of con-
trol over the power tool.
•
After you have inished work,
turn the power tool off and do not
pull the sawblade out of the cut
until it has come to a standstill.
In
this way you will avoid any kickback and
can safely put down the power tool.
• Use only undamaged sawblades
in perfect condition.
Bent or blunt
blades can break, adversely affect the
cut or cause kickback.
• Do not brake the sawblade after
switching the appliance off by
applying side pressure.
The saw-
blade may be damaged, break or cause
a kickback.
•
Tighten the material irmly. Do
not support the workpiece by
hand or foot.
Do not touch any ob-
jects or the ground with the saw running.
There is a risk of kickback.
• Hold the power tool tightly with
both hands while working and
ensure a secure footing.
The
power tool is guided more securely with
both hands.