22
GB
IE
• Vacuum only cooled ash at less than
40°C.
• When vacuuming, keep checking the
metal container (
13) and suction
hose (
14) for rises in temperature.
• In the event of a rise in temperature,
switch off the equipment and discon-
nect at the plug. Place the equipment
outside and monitor it as it cools.
• During breaks, you can place the suction
hose (
15) in the suction tube holder
(
2) on the container lid (
10).
• Always use the carry handle (
5) for
transporting the equipment.
• The metal container (
13) may be
16) always remains clear.
• Empty the container outside in order to
avoid mess (see “cleaning/maintenance“).
16) (see
“Cleaning/Maintenance”):
- if suction power declines
- if the inspection window on the con-
tainer lid of the blockage indication
system ( 7) turns red.
Semi-automatic fi lter
self-cleaning system
Insert the mains plug of the device
and turn the device on.
If the suction power decreases, you
cleaning controller ( 3).
Seal the suction port of the suction tube
(
15) or the suction hose (
14) (e.g.
with a large cloth or by pressing it on to
Press the controller ( 3) and
then turn it clockwise through
70° while holding it down.
Now release the controller.
Repeat the process 3 times.
Cleaning/Maintenance
Pull out the mains plug.
Danger of electric shock.
Never hose the appliance down
with water. Never use aggressive
cleaning agents or solvents. This
could damage the appliance.
General Cleaning Work
Clean the equipment after each use:
• Carry out cleaning outside in order to
avoid mess.
• Remove the container lid (
10) and
empty the metal container (
13).
Clean the metal container (
13) with
water and allow it to dry.
• After removing the suction
hose (
14), clean the dust and soot
particles from the connections. This
ensures that the suction hose ( 14)
can be inserted again easily.
16) (see
Cleaning the folded fi lter
16
is worn, damaged or heavily soiled
(see “replacement parts“).
