PABS 16 A2
GB
│
7
■
Operation
Switching on and off
Switching on:
♦
To start the appliance, press the ON/OFF
switch and keep it pressed in.
The LED work light lights up when the ON/
OFF switch is depressed lightly or fully. This
allows for illumination of the work area in low
lighting.
Switching off:
♦
Release the ON/OFF switch to switch off
the appliance.
Adjusting the rotational speed
The ON/OFF switch has a variable speed
control. Pressing the ON/OFF switch lightly
yields a low speed. Increasing pressure increases
the speed.
NOTE
►
The integrated motor brake ensures rapid
stoppage.
Changing the direction of rotation
♦
Change the direction of rotation by pressing the
rotational direction switch towards the left
or right.
Tips and tricks
Tip! This symbol indicates proper
behaviour.
♦
Before operating the appliance, check whether
the screw or drill bit is correctly positioned, i.e.
centred in the drill chuck.
♦
Screw bits are labelled according to their di-
mensions and their shape. If you are uncertain,
always check whether the bit fits tightly in the
screw head without any free play.
Torque:
♦
Smaller screws/bits can be damaged if you set
the torque or rotational speed too high.
Hard screw joints (in metal):
♦
Particularly high torques occur, for example, in
metal screw joints made using drive sockets.
Select a low rotational speed.
Soft screw joints (e.g. in soft wood):
♦
Again, use a low rotational speed, e.g. to avoid
damaging the surface of the wood upon con-
tact with the screw head. Use a countersink.
When drilling in wood, metal and other
materials, observe the following:
♦
Use a high speed for drill bits with small
diameter and a low speed for drill bits with
large diameter.
♦
Select a low speed for hard materials and a
high speed for soft materials.
♦
Secure or fasten the workpiece in a clamp or
vice (if possible).
♦
Mark the spot where you want to drill using a
centre punch or nail. Select a low rotational
speed when starting.
♦
Pull the rotating drill bit from the hole repeatedly
to remove dust and chips and clear the hole.
Summary of Contents for 280213
