background image

8  GB/IE

General safety rules

  

Do not use any device if its switch is defective. 
A device that can no longer be switched on and 
off is dangerous and must be repaired.

  

Store the device out of the reach of children 
when it is not in use. Do not let anyone use the 
device if he or she is not familiar with it or has not 
read the instructions and advice. Compressed 
air units are dangerous when they are used by 
inexperienced people.

  

Maintain the device carefully. Check that mov-
ing device parts are working properly and move 
freely. Check for any parts that are broken or 
damaged enough to detrimentally affect the 
functioning of the device. Have damaged parts 
repaired before using the device. Many acci-
dents have their origins in poorly maintained 
devices.

  

Switch the device off if you do not use it anymore.

  

Always wear personal protective 
equipment and safety glasses. Wear-
ing personal protective equipment 

such as dust mask, non-slip safety shoes, safety 
helmet or ear protectors, depending on the type 
of air tool and its application, reduces the risk 
of injuries.

  

Check the connections and supply lines. All 
maintenance devices, couplings and hoses must 
be equipped to meet the pressure and air amounts 
specified in the device specific values. Pressure 
that is too low influences the functioning of the 
device; pressure that is too high can cause dam-
age to property and personal injury.

  

Protect hoses from kinks, constrictions, solvents 
and sharp edges. Keep hoses away from heat, 
oil and rotating parts.

  

Make sure that the hose clamps are always 
tightly fastened. If the hose clamps are not tightly 
fastened or are damaged, the air could escape 
uncontrollably.

  

Replace damaged hoses immediately. A damaged 
supply line may result in the air hose flapping 
about and may result in injuries.

  

If the power cable of the appliance is damaged, 
it has to be replaced by the manufacturer or its 
service department or a similarly qualified per-
son in order to avoid hazards.

  

Do not use the device when tired or under the 
influence of drugs, alcohol or medications. One 

moment of carelessness when using the device 
may result in serious injuries.

  

Do not directly inhale the exhaust air. Keep eyes 
away from exhaust air. Exhaust air from the air 
tool may contain water, oil, metal particles or 
contaminants from inside the compressor. This 
may damage your health.

  

 

CAREFUL WHEN PUT-

TING THE TOOL DOWN!

 Always put down 

the device so it does not come into contact with 
the trigger. This could potentially result in acci-
dental activation of the device, which again 
could result in hazards.

  

Only use suitable accessories. These may be 
purchased from the manufacturer. Using non-
OEM accessories may result in hazards.

  

Only use filtered and regulated compressed air. 
Dust, caustic vapours and / or moisture may 
damage the motor of the compressed air tool.

  

The hose must be designed for pres-
sures of at least 6.3 bar or 125 PSI, 
but at least 150 % of the maximum 

pressure generated in the system.

  

The tool and supply line must be 
equipped with a hose coupling to 
completely release pressure when 

disconnecting the coupling hose.

  

DANGER!

 Avoid contact with live lines. This 

device is not insulated against electric shock.

  

 

RISK OF INJURY! 

High 

working pressures can give rise to recoil forces 
that under certain conditions can result in danger 
from continuous loading.

  

If you are inexperienced in the use of this type 
of device, you should seek training on how to 
handle it safely.

  

 DANGER OF STAB 

WOUNDS! 

Do not treat an injection as a simple 

cut. A high pressure jet may inject toxins into 
the body and cause serious injuries. If the spray 
is injected into the skin, seek medical help im-
mediately.

  

Do not modify this device in any way without the 
manufacturer‘s approval.

  

Only use the compressed air unit with the spec-
ified pressure (6.3 bar).

  

Disconnect the compressed air unit from the air 
supply after each use and when not in use.

General safety rules

109802_par_Druckluft-Ratschenschrauber PDRS_content_GB_IE_DK_BE_NL.indd   8

20.04.15   08:25

Summary of Contents for 109802





























































Reviews: