Parkside 10.8 A1 5 Operation And Safety Notes Download Page 35

36 GB/MT

Introduction

Lithium-ion cordless drill  
PABS 10.8 A1

 

Introduction

      Before you use it for the first time, it is es-

sential that you make yourself fully familiar 
with the functions of the appliance and 

find out how to correctly handle electrically powered 
tools. Read the following directions for use as well as 
the safety instructions. Keep these instructions. When 
handing the device on to a third party, hand these 
instructions on, too.

 

 Intended  purpose

This appliance is designed for drilling and screwing 
into wood, plastic and metal. Use the appliance only 
as described and only for the purposes indicated. 
Any other uses, and modifications to the appliance, 
are deemed to be improper usage and may result 
in serious physical injury. The manufacturer accepts 
no responsibility for damage(s) resulting from  
improper usage. The appliance is not intended for 
commercial use.

 

 Equipment  Components 

1

  Gear selector switch 

2

  Button for rechargeable battery LED

3

  Rechargeable battery LED (status indication)

4

 Bit garage

5

  Direction of rotation switch/lock

6

  ON / OFF  switch

7

 Soft-grip

8

 Battery pack

9

  Battery unlocking button

10

 Light

11

  Torque  control / drill  step

12

  Quick-action drill chuck

13

  Power supply unit

14

  Status LED red

15

  Battery charge status indicator green

16

 Charging cap

 

 Items  supplied

1 Cordless drill driver PABS 10.8-A1
1 Rechargeable battery pack PABS 10.8-A1-1
1  Power supply unit PABS 10.8-A1-2 with charging cap
2 Bits in bit garage (CR-VPH1, CR-VPH2)
1 Carry case
1 Directions for use

 

 Technical  Data

Lithium-Ion Cordless Drill PABS 10.8-A1:

Nominal voltage:  

10.8 V  

Idle-running speed:    1st gear: 400 min

-1

  

2nd gear: 1300 min

-1

Drill chuck  
clamping range: 

max. 10 mm

The following icons / symbols are used in this instruction manual:

Read instruction manual!

Keep children away from electrical 
power tools!

Observe caution and safety notes!

For indoor use only!

Caution – electric  shock!
Danger to life!

Check that the device, mains lead 
and plug are in good condition!

Explosive material!

Summary of Contents for 10.8 A1 5























































Reviews: