Parkside Performance PSBSAP 20-Li A1, Instructions Manual

Page: 23 / 115

PSBSAP 20-Li A1
GB
│
IE
│
19
■
Technical data
Cordless combi drill PSBSAP 20-Li A1
Rated voltage 20 V (DC)
Gears 2-speed gearbox
Rated idle speed 1st gear: n
0
0–400 rpm
2nd gear: n
0
0–2000 rpm
Stroke frequency 1st gear: n
0
0–7200 rpm
2nd gear: n
0
0–36000 rpm
Max. torque 80 Nm
Torque levels 1–21 + 1 drill setting/
+ 1 hammer setting
Chuck capacity max. Ø 13 mm
Max. drill diameter 65 mm for wood
16 mm for tiles
13 mm for steel
Battery PAP 20 A1*
Type LITHIUM ION
Rated voltage 20 V (DC)
Capacity 2 Ah
Cells 5
High-speed charger PLG 20 A2*
INPUT
Rated voltage 230–240 V ∼, 50 Hz (AC)
Rated power
consumption
85 W
Fuse (internal) 3.15 A
T3.15A
OUTPUT
Rated voltage 21.5 V (DC)
Rated current 3.5 A
Charging time approx. 45 min
Protection class II / (double insulation)
* BATTERY AND CHARGER ARE NOT INCLUDED
Noise emission value
Noise measurement value determined in accordance
with EN 62841. The A-rated noise level of the power
tool is typically:
Sound pressure level
L
PA
= 88 dB (A)
Uncertainty K K
PA
= 5 dB
Sound power level L
WA
= 99 dB (A)
Uncertainty K K
WA
= 5 dB
Vibration emission value
Total vibration values (vector total of three direc-
tions) determined in accordance with EN 62841:
Impact drilling in concrete a
H
,ID
= 6.0 m/s 2
Uncertainty K = 1.5 m/s 2
Wear ear muffs!
NOTE
► The vibration emission values and the noise
emission values given in these instructions
have been measured in accordance with
a standardised test procedure and can be
used for comparison of the power tool with
another tool.
► The specified total vibration values and the
noise emission values can also be used to
make a provisional load estimate.
IB_329699_PSBSAP20-LiA1_LB8.indb 19 26.08.20 13:41