www.parksafegroup.com
14
➢
Compression
：
Video definition setting, 4Mbps (high definition) and 2Mbps (low definition) can be set.
➢
Auto Record
：
Automatic recording switch. Set to ON, the video recording will start automatically after booting;
set to OFF, the video recording will not start under any circumstances after booting.
➢
Duration
：
Video Recording duration setting, 3Min, 5Min, 10Min and user-defined video duration can be set
(setting range 3-30min).
➢
Record Type
：
Recording type can be set to single camera image or panoramic image.
➢
Record Format
：
The video format can be set to AVI or MSV.
➢
IPC Switch
：
IPC recording settings. Set to ON, IPC + four-channel single view will be recorded during
recording; set to OFF, IPC will not be recorded during recording.
4)
Display
：
Display mode setup
，
as shown below
：
➢
SD Screen Adjustment
：
CVBS output screen parameter adjustment. (Note: re-adjustment is required after
switching between NTSC and PAL).
➢
Logo Setup
：
Replacement of the boot logo. Note: Currently, it supports importing 24-bit deep 1920x1080
BMP format logo image.
➢
Blending Region
：
Switch for
whether the loop view overlap area is overlapped or not. Set to ON, the
overlapping area overlaps; set to OFF, the overlapping area does not overlap.
➢
View Mode
：
Display mode switching, 2D mode or 3D mode can be set.
➢
Display Direction
：
Horizontal and vertical screens switching. (Currently unavailable).
Summary of Contents for FHD 360
Page 32: ...www parksafegroup com ...
