Operating Instructions
This appliance is
not
suitable for use in a shared flue
This appliance should
not
be operated with the doors open
Aerosol Sprays
Do not use an aerosol spray on or near the stove when it is alight.
Air Controls
This stove has been designed to burn cleaner and more efficiently than a conventional wood burning
stove. If used correctly this stove will burn far more efficiently than normal with the obvious notable
feature of CLEAN GLASS.
However, for this product to work properly it must be used correctly.
It is essential that the stove has an adequate air supply for combustion and ventilation.
The primary, secondary and tertiary air inlets must be kept clear from obstruction and blockage.
Air Controls
Primary Air
The Sliders in each Door control the Primary air.
This provides a conventional air draught to the bed of the fire.
The controls are open when the Sliders are pushed towards the outside
of the Stove.
Secondary Air
Secondary air is controlled via the slider above the doors; it is this
“Airwash” that keeps a clean and uninterrupted view of the fire.
Tertiary Air
Tertiary air aids in good secondary combustion of the fuel and
reducing emissions into the chimney and environment. Adjusting the
cover plate on the back of the stove can control tertiary air.
Damper Assembly (Optional)
When burning wood, the flue damper assembly may be fitted. When
the damper is set in the open position the chimney draws at full
draught, increasing the volume of airflow through the stove and flue.
Shutting the damper restricts the flow, slowing the rate of burning.
Warning!
The flue damper must not be fitted when burning solid mineral fuel.
Secondary Air Control
(Open Right)
Warning!
This Appliance will be
hot
when in operation and due care should be taken. The
riddling tool may be used to operate the door handle. Thick gloves could be used to operate the
primary and secondary air controls.
Primary Air Controls (Open Outwards)
