10
NOTES:
• For CANBUS vehicles a CANBUS filter should be used to filter noise and flicker on the screen. (Not
supplied)
• Please check the specifications of your vehicle to confirm whether it has a CANBUS system.
3. Some cars that run LED or computer controlled lighting systems may not deliver enough voltage to run the
camera. If the voltage at the reversing wire light is less than +12 volts it may be necessary to use a relay to
supply power to the transmitter harness from the wiring in the front of the car. In this case the reversing light
only needs to trigger the relay. Make sure that you do not drill holes in the panels that have an opposite face
that is visible outside the car, for example guard panels.
4. Connect the black wire to a ground earth wire or to the body of the car using the steel of the car body
behind the kick trim as an earth. In this case drill a small hole and connect the wire using a suitable ring
terminal. Scrape off paint around the hole to ensure good earth.
