9
• Please ensure the rear camera is fully charged before first time use. Please refer to section "Charging the
Rear Camera Built-In Battery" on page 7.
3.0 INSTALLATION
1. Remove the licence plate from your vehicle. Please do not throw away the original screws as they are
required to mount the bracket for this wireless backup camera.
2. Remove the 3M adhesive stickers from
the camera bracket.
3. Depending on your vehicle's licence
plate shape or type of plate mounting
bracket, either mount the wireless
rear camera and solar panel onto
the upperside or the underside of
the licence plate. Once aligned and
attached wait at least 20 minutes for
the adhesive to set.
4. Re-attach the licence plate to the
vehicle with original screws and tighten.
PRKM8
PRKM8
