7
2.0 GETTING STARTED
2.1 CHARGING THE REAR CAMERA BUILT-IN BATTERY
The included rear camera and solar panel will need to be charged before being installed onto your vehicle.
1. Connect the included USB cable to the Micro USB port of the solar battery unit.
2. Plug the USB cable into any standard USB charger with an output rating of 1A or higher.
3. Charge for 3 to 4 hours.
4. Charging Indicator will be red when charging commences and will turn green when charging is complete.
NOTE:
• In normal use, the camera pack will remain charged while exposed to sunlight. When the backup camera
is working, a battery status indicator will appear on the monitor. If the vehicle is parked in your garage
for more than a month, or the camera is not regularly exposed to the sun, you may need to re-charge it
through the micro USB charging port before using.
Power Switch/
Light Indicator
Micro USB plug
Jump starter
