21
4.2. Unpacking the Product
The Parklio Parking Barrier is shipped sealed and folded.
After opening the package, remove the smaller box and lift the barrier arch to remove
the safety pin. Pull the barrier out of the box by gripping it by the base with both hands.
To prevent damage, never remove the barrier from the box by pulling on the barrier
arch. Place it on a flat concrete floor and unfold the barrier arch to the ground.
Please inspect the barrier for damage and test it before securing it to the ground.
The motor tube assembly has a rising limiter that prevents
you from raising the actuator too high when inserting a
safety pin - causing damage to the wiring. Don’t force raise
it, as it will cause the rising limiter to break and result in a
wiring problem that will prevent your barrier from
functioning normally.
To test the barrier, insert the safety pin that connects the barrier arch to the motor
tube.
STEP 1.
Unlock the motor tube by inserting the key and rotating it. The lock should pop
out.
STEP 2.
Raise the motor tube to the same level as the arch and insert the safety pin
through both the arch and the tube.
___________________________________________________________________________
FAQ
www.parklio.com
[email protected]
+385977247276
