50
3.Check if there exists any slip thread, crack or other
defects on the fastening bolts, in which case the
bolts must be replaced.
4.Check whether the steering bar clip is
damaged(Figure 4-1-12).(Radial runout and wear
condition of the inner surface must be less than
0.8mm) Otherwise, replace the steering bar clip.
4.1.2.3
Assembly of the steering bar
1.Connect the steering bar, clip and holder with the
main frame by hexagon flange bolts M8*30 (4pcs) and
adjust the direction of brake cables on both left and
right handlebar and clutch cable(Figure 4-1-2)
Fastening Torque of the M8*30 Bolt is: 26-30N.m
4.2
Brake System
4.2.1Front Disk Brake components
Summary of Contents for 700ATV
Page 1: ...1 700ATV Maintenance Manual...
Page 5: ...5 General Information 1 Description...
Page 85: ...85...
Page 101: ...101 L1 L2 30A CDI m m i n 1000 FUEL OVERRIDE...
