5
SYMBOLE
Some of the following symbols may be used on this tool. Please study them and understand their
meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
DESIGNATION/EXPLANATION
Safety Alert
Indicates danger, warning or caution. It means attention!
Your safety is involved.
Read The Operator’
Manual
Read the operation manual and follow all warnings and
safety instructions.
Cutting Tool
Do not touch the tool without first switching off the engine.
Keep bystanders away
Keep all bystanders at least 15m (50 ft) away.Keep the pole
pruner a sufficient distance away from electrical power
lines.
Keep high-voltage
power lines away
Always keep a distance of at least 10 m between the
machine and high-voltage power lines and/or any objects
that are touching them.
Boots
Wear non-slip safety footwear when using this equipment.
Gloves
Wear non-slip, heavy-duty gloves.
No Smoking
Do not smoke when mixing fuel or filling fuel tank.
Petrol
Use unleaded petrol intended for motor vehicle use with an
octane rarting of 91([R+M]/2) or higher.
Oil
Use 2-stroke oil for air cooled engines.
Mix Petrol and Oil
Mix the fuel mix thoroughly and also each time before
refuelling.
Fully press and release the prime bulb 5 times.
All relevant directives, which require the CE-marking and
which are applicable for the product, are fulfilled.
Wear eye, hearing and head protection when operating this
equipment.
To reduce the risk of injury or damage, avoid contact with
any hot surface.
Guaranteed sound power level
