Cleaning The Door Glass
Installing the cooker
Location
25
S I G 3 2 0
Installation
To prevent damaging or weakening the door glass panels
avoid the use of the following:
Household detergents and bleaches
Impregnated pads unsuitable for non-stick saucepans
Brillo/Ajax pads or steel wool pads
Chemical oven pads or aerosols
Rust removers
Bath/Sink stain removers
If the door glass panel becomes chipped or has deep
scratches the glass will be weakened and must be replaced
to prevent the possibility of the panel shattering. Please
contact your local Service Force Centre who will be
pleased to advise further.
For your safety
This cooker must be installed and serviced by a competent person as
stated in the Gas Safety (Installation & Use) regulations current editions
and the IEE Wiring Regulations.
It is important that the cooker is suitable for your gas supply. Your
installer should check the data badge.
Make sure that a stability bracket is fitted.
For your safety
The use of a gas cooking appliance results in the production of heat
and moisture in the room in which it is installed. Ensure that the kitchen
is well ventilated: keep natural ventilation holes open or install a
mechanical ventilation device (mechanical extractor hood).
Prolonged intensive use of the appliance may call for additional
ventilation, for example opening of a window, or more effective
ventilation, for example increasing the level of mechanical ventilation
where present.
For further details see page 34.
