8. CHECKING THE HOTPLATE
Fit the burner crowns and caps ensuring that they are correctly seated. Fit the pan supports. Check each of
the hotplate burners in turn by turning the hotplate tap to it's full on position and pressing the ignition button.
As soon as the burners are lit the button can be released.
9.
CHECKING THE MAIN OVEN
1.
Turn the oven thermostat knob to Mk 9 and press the ignition button. As soon as the burner is alight the
button can be released.
2.
There should now be a low gas rate to the burner, which is the F.S.D. by pass rate.
3.
When the F.S.D. phial has heated up it opens the F.S.D. valve which allows the main gas supply to the
oven burner.
4.
Set the oven control to Mk 2, close the oven door and check that after about 10 minutes the flame size
has reduced.
5.
Turn off the control and check that the oven flames go out.
GENERAL NOTE
Instruct the user on how to use the appliance and its ignition system. Refer the user to the wording in the
inside cover which gives advice on the safe operation of the appliance.
36
Summary of Contents for CALOR Sonata 50
Page 1: ...Owners handbook and Installation instructions...
Page 37: ...N O T E S...
Page 38: ...SONATA 50 311325108 N O T E S...
