Parking Facilities PFGOGSM, Manual

Page: 13 / 14

No. Command Description settings Default
17
74[admin number] #
Add administrator phone number
admin number =3 ~14
digits ( no number no
restriction)
N/A
18
74*#
Delete administrator phone number
19 75[N][ phone number]# Add mobile number of alarm contact
when inputs are triggered.
N=1~3 (sequence of phone
number)
phone number =3 ~14
digits N/A
20
75[N] *# Delete mobile number of alarm contact
when inputs are triggered. N=1~3(sequence of phone
number)
N/A
21 999# Reset
User commands list (to check system info & control relay via SMS)
No. Command Description SMS Reply
1
*12*1234 # [ command
Code 1 ] # [command Code
2 ] # [ command code 3 ] #
[command code 4 ] #........ Programming by text
message
format
Successful:command Code#..... OK
Failed: command Code#........ Error
2 *21* 1234 # check GSM signal
strength and operator Signal Level = 0~31
From poor to strong
3
*22* 1234# Reply list of ringing in to
open phone number
s
[ number1]#[number2]#[number3] #......
E:Next page
N: End
4
*23*1234# Reply list of alarm contact
numbers when inputs are
triggered
[ number1]#[number2]#[number3]
#
5
*24*1234#
Check relay and inputs
status Relay 1: status (status= h old/ release /
trigger)
Input1: status (
status= high / low)
Input 2:status ( status= high / low)
6
*31*1234#[ SMS content ]# Store SMS content when
input 1 is triggered.
SMS content= max 100 characters
7 *31*1234# To check input 1 SMS
content Default SMS “ trigger 1 is active ”
8 *32*1234#[ SMS content]# Store SMS content when
input 2 is triggered.
SMS content=max 100 characters
9 *32*1234# To check input 2 SMS
content Default SMS “ trigger 2 is active”
10
* 71* 5678 # Trigger relay 1
(You can’t trigger when
relay is on hold status
before you release it)
No reply
11
* 72* 5678 # Hold relay 1 No reply
12 * 73* 5678# Release relay1 No reply
Page 13