30
31
CLEANING FUEL VALVE/DRAINING THE FUEL TANK
TROUBLESHOOTING
Unscrew and remove the cup, then remove the
valve filter and ‘O’ ring.
Wash these parts in a non-flammable solvent.
Make sure that the valve filter is not damaged.
Place an approved petrol storage container
under the fuel valve and set the fuel supply valve
to ‘ON’. The fuel in the tank will drain into the
container.
Replace the ‘O’ ring and valve filter and tighten
the cup as far as possible.
2
REMOVE VALVE FILTER PARTS
3
Set the fuel supply valve to OFF.
1
TURN VALVE OFF
REASSEMBLE VALVE FILTER
PROBLEM
POSSIBLE CAUSE
SOLUTION
GENERATOR
WILL NOT START
Engine switch is 'Off'
Set Engine switch to 'On'
Out of fuel
Fill fuel tank
Engine oil low
Add engine oil
Spark plug wire disconnected
Connect spark plug wire
Bad spark plug
Replace
Clogged fuel filter
Contact ParkerBrand
GENERATOR FAILS TO
GENERATE ELECTRICITY
Device you are trying to power is faulty
Make sure the device you want to power is working
The AC breaker is switched off
Switch the AC breaker on
GENERATOR IS DIFFICULT
TO START
Dirty air filter
Clean air filter
Dirty fuel filter
Clean fuel filter
If this does not solve your problem, please contact the ParkerBrand customer service department
01507 499198.
VALVE
FILTER
VALVE
'O' RING
VALVE
CUP
