20
21
STARTING THE ENGINE
Make sure there is sufficient fuel and oil inside the
chainsaw. Fuel should be fresh unleaded petrol mixed
with 2-stroke oil at a ratio of 25:1.
Example: 1 litre of unleaded petrol mixed with 40ml of
2-stroke oil.
If your chainsaw is fitted with a fuel primer press the
bulb six times. If the bulb is still not full of fuel please
repeat the process.
2
FILL THE TANKS
3
Oil Cap
Fuel Cap
Always start the engine with the chain brake engaged.
Engage the brake by pushing the brake handle away
from you when holding the saw. The brake is spring
loaded so after some initial force the brake will move
forward with its own momentum.
1
ENGAGE THE BRAKE
Before starting the engine make sure
you have read and fully understood
the user manual including fuelling
and safety procedures.
FUEL THE PRIMER
4 A
STARTING THE ENGINE
For cold engine starts, close the choke by pulling the
blue choke lever outwards. When closed it should click
and remain in position until the throttle is pressed.
For warm engine starts, confirm the choke is open by
pressing the throttle so the choke lever returns inwards.
4
CLOSE CHOKE (COLD START)
OPEN CHOKE (WARM START)
B
